***
*** PLEASE REMEMBER: Always reboot the device first before you proceed with firmware upgrade.
***

The firmware file in this archive (OSWave_2.37R.bin) can be used to upgrade any device, regardless of hardware version,
that is already running OSWave system.

2009-03-29 Version 2.30R <firmware@oswave.com>

- Added support for Engenius EOC-5610.
- Added option to disable PPPoE relay in router/NAT router mode.
- Fixed problem in client mode with WPA enabled where device sometimes didn't forward ARP packets properly.
- Fixed WEB GUI problem on D-Link DIR-300 that prevented changes on Advanced Settings page.

2009-06-18 Version 2.34R <firmware@oswave.com>

- Fixed SNMP noise level reporting in PtP Bridge mode.
- Added automatic system information page update.
- Fixed device MAC address display in Dynamic WDS mode.
- Addedd XTRange.
- Added SNMP associated stations reporting in Access Point mode.
- Fixed WPA encryption issues when operating in PtP Bridge mode.
- Fixed association problems sometimes occuring when using 5MHz or 10MHz channel width in 2.4GHz mode.

2009-08-31 Version 2.36R <firmware@oswave.com>

- Fixed bug causing site survey in client mode not showing access points with low signal level.
- Fixed bug causing reconnect problems in PtP Bridge mode when using WPA encryption.
- Fixed problem with Dynamic WDS mode.

2009-09-19 Version 2.37R <firmware@oswave.com>

- Fixed problem with SNMP not replying to queries.
- Fixed problem with AR5312 devices startup (v2.36R).