***
*** PLEASE REMEMBER: Always reboot the device first before you proceed with firmware upgrade.
***

The firmware file in this archive (OSWave_2.20R.bin) can be used to upgrade any device, regardless of hardware version,
that is already running OSWave system.

2008-03-14 Version 2.11R <firmware@oswave.com>

- Fixed a number of bugs first appearing in version 2.08R, related to wireless operation and performance, affecting
link speed and stability when using 802.11a devices.
- Fixed WPA encryption in Access Point mode.
- Fixed WPA encryption in Point to Point bridge with Packet Aggregation enabled.
- Added option to choose WEP encryption type (open/shared) when operating in client mode.

2008-05-15 Version 2.14R <firmware@oswave.com>

- Added Dynamic WDS (Wireless Distribution System) operation mode.
- Fixed performance problems when operating in Polling mode.
- Added initial support for Virtual Access Points (up to 8 VAPs).
- Added support for D-Link DIR-300.

2008-05-23 Version 2.15R <firmware@oswave.com>

- Fixed bug with second wireless interface disappearing on AR5312 based devices (on 2.14R firmware only).

2008-06-03 Version 2.16R <firmware@oswave.com>

- Fixes for polling client and base operation modes.

2008-08-10 Version 2.20R <firmware@oswave.com>

- Fixed QOS operation in Polling Base/Polling Client modes.
- Fixed QOS operation in NAT Router mode.
- Added multiple port forwarding option with one port forwarding rule.
- Added Mikrotik RouterOS compatible WDS client mode.
- Fixed TFTP firmware upgrade procedure.
- Fixed WPA encryption for AR5312 based devices.
- Fixed Noise Floor reporting.

2008-08-20 Version 2.21R <firmware@oswave.com>

- Fixed error where device doesn't perform reset to default settings properly.

If you are running OSWave ver. 2.20R then it is highly recommended to upgrade to ver. 2.21R.

2008-11-06 Version 2.21R2 <firmware@oswave.com>

- Fixed an error where device operating as bridge would sometimes loose ARP entries of hosts behind it thus making them unreachable.